Archived 2016 Lapp Group International Catalog

Tools and cable accessories Connection and crimping • EMC protection

ÖLFLEX ® ACCESSORIES FLEXIMARK ® SILVYN ® SKINTOP ® EPIC ® HITRONIC ® ETHERLINE ® UNITRONIC ® APPENDIX

SHIELD-KON ® two-part screen connector S

Installation: 1. After stripping the screen (approx. 12.7 m length), push the outer sleeve onto the outer insulation. If this is too thick, push on the outer sleeve from front after step 3. 2. Extend the screen braiding by rotating the inside conductor slightly and pushing the inner sleeve under the screen braiding. 3. Position the inner sleeve in such a way that about 1.6 mm is still protruding from the end of the screen, and press on the braiding. 4. Push the conductor under the outer sleeve and push the outer sleeve over the braiding. 5. Position outer sleeve and make sure that ends of all wires in the screen braiding and the outer conductor are hidden. 6. Crimp both sleeves.

Which inner sleeve to which outer sleeve? Inner sleeve GSB: Define the maximum outer diameter of the inner sheath under the braid/screen. Select from the chart the matching inner sleeve (outer diameter inner sheath = inner diameter inner sleeve). In case of in-between values, please select the next size. Outer sleeve GSC: Add 1.5-2 mm to the outer diameter of the selected inner sleeve and then select the outer sleeve (resulting diameter after addition = inner diameter of outer sleeve). Press insert: By means of the selected outer sleeve, you can now determine the appropriate press insert.

SHIELD-KON ® two-part screen connector crimping accessories

Benefits • Manual pressing pliers with removable

Technical data

ETIM 5.0 Class-ID: EC002020 ETIM 5.0 Class-Description: Shield connection clamp

press matrices for two-part SHIELD-KON ® connectors

• Integrated forced lock only allows the tool to be opened after it has completely closed (emergency opening possible) • Appropriate press insert can be determined by using the selected outer sleeve Product Make-up • Crimping profile: Hexagonal

Included • Article number 61743920: Pliers without case and without pressing dies • Article number 61792250: Empty case with space for 12 inserts • Crimping inserts have to be ordered seperately

Article number

Article designation

Suitable for outer sheaths

Pieces / PU

Crimping tool 61743920

WT 4454 G

1

Accessories crimping tool 61792250

WT case for WT 4454 G

1

Crimping dies 61789480

4419-4403 G 4406-4410 G 4411-4414 G 4415-4417 G 5450-5451 G

GSC 101 / 128 / 149 / 156 / 175

1 1 1 1 1 1 1 1 1

61789490 61789500 61789510 61789520 61789530 61789540 61789550 61789560

GSC 187 / 194 / 199 / 205 / 219 / 225 / 232

GSC 261 / 275 / 281 / 287 / 297

GSC 312 / 327 / 348

GSC 359 / 375 GSC 405 / 415

5452 G 5454 G 5456 G 5457 G

GSC 425 GSC 460 GSC 500

SHIELD-KON® is a registered trademark of ABB. Photographs are not to scale and do not represent detailed images of the respective products. Crimping inserts on picture of WT 4454 G are not depicting the SHIELD-KON®inserts, they are depicted in an extra picture

For current information see: www.lappgroup.com

1041