LAPP North America's current product catalog

EPIC ® Rectangular connector inserts

STA series EPIC ® STA series Inserts with solid spring-designed contacts for low voltage control applications

EPIC ® STA series inserts with solid spring-designed contacts are used extensively in the construction of devices and in control units, laboratories, and withdrawable unit design. These inserts are available with screw or solder termination, and fit into EPIC ® HA series housings.

Technical data Number of contacts:

Rated current:

6, 14, 20, 40

- UL/CSA; IEC:

10A

Temperature range:

-40°C to +80°C

Wire size:

- solder termination: - screw termination:

up to 16 AWG (1.5 mm²) 20 - 16 AWG (0.5 - 1.5 mm²)

Pollution level:

2

Mating cycles:

- per DIN EN 61984:2008 Service Life Test: Tested to 100 cycles and passed

Contact material:

silver-plated copper alloy

Contact resistance:

< 2 mΩ

Test voltage:

1 kV

Rated voltage: - UL/CSA:

48V 60V

- IEC:

* In dry, non-conductive, non-corrosive environments when protected in a housing rated at least IP54 and disconnected for cycling and maintenance only.

18 AWG (1 mm²) EPIC ® STA derating curves

for current information see: www.lappusa.com • www.lappcanada.com

307