LAPP North America's current product catalog
Appendix Technical data
Connectors
There is no right or wrong way to position a connector for installation. The goal is to match the hood entry to the installation requirement as closely as possible.
Choose your housing by answering these two questions: 1. Where are you mounting the connector? 2. Where is the cable coming from?
This will allow you to make a reasonable selection.
Diagram example
Hood entry location
Cabinet mounting panel surface
Cable entry direction
1
top
top
vertical down from above
2
side
top
horizontal from side
3
side
side
vertical up from below
4
side
bottom
horizontal from side
5
top
bottom
vertical up from below
6
top
side
horizontal from side
7
side
side
vertical down from above
Single vs. double bolt hoods
connectors mounted horizontally
connectors mounted vertically
Although either bolt location can be used, the key is to use a bolt location that allows the connectors to be mounted as close together as possible while providing the maximum access possible to the locking levers on the base.
For connectors mounted horizontally side by side, the double bolt location is recommended.
For connectors mounted vertically top-to-bottom, the single bolt location is recommended.
Panel cut-out sizes
A
B
C
D
E
Panel mount base size
in
mm in
mm in
mm in
mm in
mm
EPIC ® HA HA 3
1.181 30
—
— 0.827 21.0 0.827 21.0 0.130 3.3
HA 10 HA 16 HA 32 HA 48 HA 64 HB 10 HB 16 HB 24 HB 32 HB 48
2.756 70 0.689 17.5 2.264 57.5 0.945 24.0 0.142 3.6 3.386 86 0.689 17.5 2.902 73.7 0.945 24.0 0.142 3.6 3.622 92 1.654 42.0 2.921 74.2 1.906 48.4 0.169 4.3 4.331 110 2.560 65.0 3.366 85.5 2.795 71.0 0.217 5.5 5.827 148 2.756 70.0 4.606 117.0 3.228 82.0 0.276 7.0 2.756 70 1.260 32 2.055 52.2 1.378 35.0 0.169 4.3 3.268 83 1.260 32 2.567 65.2 1.378 35.0 0.169 4.3 4.055 103 1.260 32 3.366 85.5 1.378 35.0 0.169 4.3 5.118 130 1.260 32 4.409 112.2 1.378 35.0 0.169 4.3 4.331 110 2.560 65 3.366 85.5 2.795 71.0 0.217 5.5 5.827 148 2.756 70 4.606 117.0 3.228 82.0 0.276 7.0
EPIC ® HB HB 6
for current information see: www.lappusa.com • www.lappcanada.com
685
Made with FlippingBook flipbook maker