LAPP North America's current product catalog

UNITRONIC ® Bus cable & connectors

PROFIBUS

EPIC ® DATA PROFIBUS ® connectors 35°, 90° & 180° with screw terminal

• When used as a through connector the switch must be in the “OFF” position. If used as a terminating connector the switch must be in the “ON” position. • If the switch is in the “ON” position, the outgoing bus cable is disconnected. • Switch is clearly visible when connector is plugged in and operational. • LED version: 3 status LEDs indicate: bus operation (green), station EPIC ® DATA PROFIBUS connectors are screw terminal, 9 pin D-sub connectors with an integrated adjustable termination resistor. Connectors are available with additional programming/diagnostic interface. The following designs are available: 35° angled, 90° angled, 180° angled, 90° angled with LED for easy troubleshooting and visual connection control. Usage notes

Design

Connection type: screw terminal For cable diameter: 0.197 - 0.315 in (5 - 8 mm) Terminating resistor: integrated resistor combination that is

connected by a sliding switch Interface: 9 pin D-sub socket Weight: 40g Insertion/withdrawal cycles: > 200

Application advantage

transmission (blue), terminating resistor “on” (orange) • D-sub pin assignment in accordance with PROFIBUS

• Standardized interfaces • Cost-saving due to quick installation • Easy to connect • Small design • Fully compatible with market standard

Approvals

Technical data Temperature range: - operating: - transport & storage:

Interface: - PROFIBUS station: - PROFIBUS cable:

0°C to +60°C -25°C to +80°C

9 pin D-sub socket

4 terminal blocks for wires up to 1 mm²

- relative humidity:

max. 75% at +25°C

Protection rating:

Approvals:

IP20

UL: Programmable Controllers: Components Canada: Programmable Controllers Certified: Component Additional: CE & RoHS

Supply voltage:

4.75 - 5.25V DC

Transmission rate:

max. 12 Mbit/s

Current consumption:

max. 12.5 mA

Dimensions (L × W × H)

Part number

Programming/ diagnostics

Current consumption

Cable outlet

Diagnostics LED

mm

21700506 21700507 21700503 21700504 21700529 21700530 21700505

35° 35° 90° 90° 90° 90°

yes

no no no no

54 × 40 × 17 54 × 40 × 17 64 × 40 × 17 64 × 40 × 17 64 × 40 × 17 64 × 40 × 17 68 × 39.5 × 17

12.5 mA 12.5 mA 12.5 mA 12.5 mA

no

yes

no

yes

yes yes

35 mA 35 mA

no no

180°

no

12.5 mA

PROFIBUS ® is a registered trademark of PROFIBUS & PROFINET International (PI). If not otherwise specified, all values relating to the product are nominal values. Photographs are not to scale and are not true representations of the products in question.

for current information see: www.lappusa.com • www.lappcanada.com

179